2026 Q3 data
Roof replacement cost in Washington
How much does a new roof cost in Washington?
$14,000 – $24,900
Typical $19,400 · architectural shingles · 2,000 sq ft home
That is $4.55 to $6.65 per square foot of roof installed, above the US typical.
How we got this number
An architectural shingle roof in Washington costs $455 to $665 per square installed (typical $560) on the 2026 Q3 Roof Cost Index, +12.0% against the US typical of $500. State rank 6 of 51 (1 = most expensive).
Material is priced nationally; labor is scaled by the state roofer wage. Roofers in Washington earn a mean $33.11/hour (BLS, May 2025), a labor index of 1.185. The whole-roof range is for a 2,000 sq ft single-story home (6/12 pitch, one layer torn off, permit and dumpster included). Full methodology.
All materials in Washington
| Material, per square | Low | Typical | High |
|---|---|---|---|
| Architectural shingles | $455 | $560 | $665 |
| 3-tab shingles | $317 | $401 | $485 |
| Standing seam metal | $992 | $1,370 | $1,748 |
| Metal panel | $574 | $1,011 | $1,448 |
| Tile | $792 | $2,003 | $3,214 |
| Slate | $1,074 | $2,166 | $3,258 |
| Flat membrane | $287 | $535 | $783 |
A typical 2,000 sq ft footprint at a medium pitch is about 24.6 squares, so multiply the per-square figure by roughly 25 for a whole-roof number before tear-off, permit and extras. Use the calculator below for your own footprint.
Metro areas in Washington
| Metro (BLS MSA) | Typical / square | vs state | Metro rank of 263 |
|---|---|---|---|
| Seattle-Tacoma-Bellevue, WA | $584 | +4.4% | 12 |
| Mount Vernon-Anacortes, WA | $563 | +0.6% | 19 |
| Bremerton-Silverdale-Port Orchard, WA | $542 | -3.2% | 33 |
| Spokane-Spokane Valley, WA | $542 | -3.2% | 34 |
| Kennewick-Richland, WA | $536 | -4.4% | 41 |
| Bellingham, WA | $531 | -5.3% | 46 |
| Wenatchee-East Wenatchee, WA | $530 | -5.4% | 50 |
| Longview-Kelso, WA | $522 | -6.8% | 62 |
| Olympia-Lacey-Tumwater, WA | $521 | -6.9% | 63 |
| Yakima, WA | $521 | -6.9% | 64 |
| Walla Walla, WA | $472 | -15.7% | 146 |
| Portland-Vancouver-Hillsboro, OR-WA (listed under OR) | $549 | -2.0% | 27 |
Only metros with a BLS roofer wage row appear. Areas outside these metros use the state figure.
How Washington compares
Washington ranks 6 of 51 states. Nearby on the Index: Minnesota ($583), New York ($563), District of Columbia ($559), Connecticut ($558). The spread across all states runs from $609 to $428 per square, and the whole gap is labor: material is priced nationally in this edition.
This page is generated from the 2026 Q3 Index. A written guide for Washington is added when the state is activated with a roofer partner and a county footprint source. Methodology.
Washington roof cost questions
How much does a new roof cost in Washington?
On the 2026 Q3 Roof Cost Index, an architectural shingle roof on a 2,000 sq ft single-story home (6/12 pitch, one layer torn off, permit and dumpster included) costs $14,040 to $24,926 in Washington, typical $19,443. That is about 24.6 squares of roof.
How much is a new roof per square foot in Washington?
Architectural shingles run $4.55 to $6.65 per square foot of roof surface installed in Washington (typical $5.60), or $455 to $665 per square of 100 sq ft. Tear-off, permit and dumpster are extra.
How much does a metal roof cost in Washington?
Standing seam metal on the same 2,000 sq ft home costs $27,246 to $51,565 in Washington, typical $39,365, because standing seam material alone runs $400 to $800 per square against $100 to $250 for architectural shingles.
Why is roofing more expensive in Washington than the US average?
Labor. Roofers in Washington earn a mean $33.11 an hour (BLS, May 2025) against $27.95 nationally, a labor index of 1.185. Material is priced nationally in this edition, so the whole +12.0% gap is labor.
Which Washington metro has the highest roofing cost?
Seattle-Tacoma-Bellevue, WA is the most expensive metro touching Washington at $584 per square; Walla Walla, WA is the least at $472. Areas outside a metro use the state figure.
Estimate a roof in Washington
Free, no email needed. Change any field and the estimate updates.